Crankshaft grinding and polishing is an important activity which is required after running of engine for a long time as due wear and tear taper and ovality is created. Again in case of failure of bearing grinding and polishing of crankshaft is required. In olden times it was necessary to remove the crankshaft from the block and send it to the designated workshop for grinding and polishing of crankshaft.
The removal of crankshaft from the block involved disassembly of complete engine, packing, and transportation to the workshop resulting to high downtime and expensive. RA Power Solutions has developed, design, and manufactured on site crankshaft grinding machine which can undertake grinding of crank pins or journals up to the diameter of 700 mm. The machine is capable of maintaining the tolerance within 0.02 mm in terms of taper and ovality. It is very easy to operate and needs minimum training.
The machine is lightweight and can be taken to the site. The machine is in two parts and can be inserted in the engine block through the inspection window, facilitating grinding of the CR Pin without removal of the crankshaft. The grinding and polishing is undertaken by same machine. RA Power Solutions suggests polishing and grinding, if necessary, the crankshaft whenever it is open for major overhauling. This will considerably enhance the life of the crankshaft, bearing, and engine. The machine gets its drive from a pneumatic turbine, which is again lightweight. The drive is also given by an electrical motor where the air supply is not available. The assembly of the machine and its operation can be seen on our YouTube channel
https://www.youtube.com/channel/UCxcP2Jc6DGFdpBokIcxVyBg
RA Power Solutions has supplied more than 100 machines to clients based all over the world who are more than satisfied with its performance, quality, and ease of operation. The crankshaft grinder is manufactured by us to cater to the crankshaft diameter ranging from 35 mm to 700 mm. All the parameters, specifications, and tolerances as required by the engine manufacturer are maintained after undertaking the Crankshaft Repairs by the crankshaft grinder manufactured by RA Power Solutions.
For more information on Crankshaft Repairs, crankshaft repair made easy, crankshaft grinding, crankshaft grinding and polishing, in situ crankshaft grinding machine, and repair of crankshaft email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.