Crankshaft Grinding & Polishing Machine | Onsite Cylindrical Grinding Machine

Crankshaft is considered to be a heart of the engine. It is important that all the parameters recommended by engine manufacturers are strictly maintained for continuous and satisfactory performance of the engine.

It is observed that crankshaft failure can happen at any time in spite of excellent maintained engine. Secondly, due to continuous running of a diesel engine wear and tear, development of taper and ovality, pitting, and rough surface is developed. This needs to be corrected. By introduction of onsite crankshaft grinding and crankshaft polisher machine, RA Power Solutions has made onsite crankshaft grinding and polishing easy. Now there is no need of removing the crankshaft and sending it to the workshop for repairs.

Crankshaft Grinding and Polishing Machine
Crankshaft Grinding and Polishing Machine

With our revolutionary onsite crankshaft grinding and onsite polishing machine, it is possible to do the repair crankshaft onsite.

Crankshaft grinding & crankshaft polishing machine has the following features:

  • The crankshaft grinding machine is available in the range of 30 mm to 700 mm which covers crankshafts of small to high-capacity engines.
  • The performance of onsite crankshaft grinding machine manufactured by RA Power Solutions is a proven, solution-focused approach with guaranteed results in terms of tolerances. By using onsite crankshaft grinding machine, shipping companies, diesel power plant, and drydocks have reduced the downtime considerably and save money which really matters due to competition.
Crankshaft Grinding Machine of High Diameter
Crankshaft Grinding Machine of High Diameter
  • The onsite crankshaft grinding and polishing is undertaken by the same equipment. Every time engine is open for major overhauling, crank pin and main journal of crankshaft can be polished to remove the bearing line marks and to improve the surface finish. This increases the life of bearing and avoids crankshaft from breakdown.
  • The crankshaft grinding and crankshaft polishing machine is designed to provide workshop quality service onsite, drydock or even while sailing of the vessel. The crankshaft grinding equipment has minimum vibrations, manufactured of titanium alloy which absorbs the vibrations. This facilitates to maintain close tolerances of crankpin and main journal of the crankshaft even while sailing of the vessel.
  • 24/7 global support services are provided for any guidance for operation and maintenance of the onsite crankshaft grinding machine. A training program is designed and arranged onsite covering all the aspects of the operation and maintenance of the machine.
  • Machine is priced low and has the capability to generate high revenue in a short time. The onsite crankshaft grinding machine is supplied complete in all respect and ready to operate with consumables sufficient to repair one crankshaft.
Crankshaft Grinding Machine for Small Diameter
Crankshaft Grinding Machine for Small Diameter
  • RA Power Solutions maintains a large databank of crankshafts of reputed diesel engine manufacturer and their models.

The author is Mr. Raj Shahani, Managing Director of the company. He is having 40 years of experience in grinding of crankshaft, polishing of crankshaft and all services related to repair of engines and supporting equipment. He has designed and developed the portable crankshaft grinding machine to save time and money.

We will be pleased to share more information regarding onsite crankshaft grinding and polishing machine, please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Onsite Crankshaft Grinding Machine Ready for Dispatch
Onsite Crankshaft Grinding Machine Ready for Dispatch
Accessories of Onsite Crankshaft Grinding and Polishing Machine
Accessories of Onsite Crankshaft Grinding and Polishing Machine

Crankshaft Repair by Portable Grinding and Polishing Machine – RA Power Solutions

RA Power Solutions has four decades of experience undertaking grinding and polishing of crankshaft. We can undertake onsite grinding and polishing of crankshaft from 50 mm to 700 mm. Team of experienced technicians are deputed to the site with lightweight, portable crankshaft grinding machine. The repair of crankshaft is done without removing the crankshaft from the engine block. This saves time and cost involved in disassembly of crankshaft, packing, and transportation of crankshaft to the workshop.

Potable Crankshaft Grinding Machine
Potable Crankshaft Grinding Machine
Crankshaft Grinder
Crankshaft Grinder

Worldwide the repair of crankshaft in workshop is outdated. We depute our technicians all over the world with portable equipments for repair of crankshafts. The repair is executed strictly as per the manufacturer’s specifications and tolerances. The crankshaft repairs are guaranteed for satisfactory performance.

Repair of Crankshaft by Crankshaft Grinding Machine
Repair of Crankshaft by Crankshaft Grinding Machine
Crankpin After Grinding of Crankshaft
Crankpin After Grinding of Crankshaft

The recent introduction of vibration-less portable onsite crankshaft grinding machine facilitates us to execute crankshaft repair while vessel is sailing.

Our technicians have seaman passports and they can board the vessel from one port and disembark from another port. Thus, saving the cost of anchorage or stay at port.

Crankshaft Repair on Board the Vessel
Crankshaft Repair on Board the Vessel
Offshore Grinding of Crankshaft is in Process
Offshore Grinding of Crankshaft is in Process

We also manufacture crankshaft grinders which are priced low and easy to operate. These revolutionary machines are recommended for shipping companies, repair workshop heavy engineering company, etc.

For more information, call us at +91 – 124 – 4378292, +91 9582647131, or email us at rajshahani@rapowersolutions.com, info@rapowersolutions.com.

Revolution in Crankshaft Grinding- RA Power Solutions

revolution in engineering 11

Good News for Shipping Companies, Power Plants and Repair Workshops.

Crankshaft grinding machine up to 700 mm diameter is designed, developed and manufactured by RA Power Solutions. Machine is having following features:

Crankshaft Grinding Machine Design: Machine is portable; light weight and can be carried to the site. Nowadays, there is no need of disassembly of complete engine.

Operation of Crankshaft grinding machine: The machine is operated pneumatically or by electrical motor. The design is so simple and machine can be easily operated by a skilled technician.

Quality: Crankshaft grinding machine is capable of maintaining close tolerance in terms of taper and ovality up to 20 microns and can also achieve the surface finish as per the International standards.

Training: RA Power Solutions Pvt. Ltd. provides training to the clients, and technicians for the duration of 3 days. The assembly, operation, and maintenance of the machine are explained.

Cost of Machine: Presently, shipping companies and power plants having high-capacity diesel generating sets have no option but to call for technicians from the companies based in Norway, Singapore, UK and various countries by paying exorbitant amount and travel expenses. The Crankshaft grinding machine is manufactured by RA Power Solutions is very reasonably priced and the cost can be recovered in 1 or 2 jobs of repairs.

We have supplied more than 60 In situ crankshaft grinding machines all over the world which are performing satisfactory.

Disassembly of Crankshaft Grinding Machine with Pneumatic Motor
Disassembly of Crankshaft Grinding Machine with Pneumatic Motor

Disassembly of Crankshaft Grinding Machine
Disassembly of Crankshaft Grinding Machine

Assembly of Crankshaft Grinding Machine in Progress
Assembly of Crankshaft Grinding Machine in Progress

Assembly of Crankshaft Grinding Machine with Pneumatic Motor
Assembly of Crankshaft Grinding Machine with Pneumatic Motor

 

Packing in Progress- Insitu Crankshaft Grinding Machine
Packing in Progress- Insitu Crankshaft Grinding Machine

Onsite Crankshaft Grinding Machine Ready for Dispatch
Onsite Crankshaft Grinding Machine Ready for Dispatch

WORKING OF ONSITE CRANKSHAFT GRINDING MACHINE (400-450mm)

For more information on revolution in crankshaft grinding contact us today by please email us at rajshahani@rapowersolutions.com, or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.