Cast Iron Repairs | Cracked Engine Block Repair | Damaged Engine Bedplate Repairs | Metal Stitching – RA Power Solutions

The repair of a damaged engine block, turbocharger casing, heavy cast iron parts can be successfully repaired by metal stitching, metal locking, and metal surgery process.

The repair of crack and repair of damaged casting by welding process is now completely outdated and is not recommended for repair of damaged cast metal and cast iron parts. In fact, it is observed that in certain cases repair by welding results in more serious damage due to the generation of heat and stress during the process of welding. RA Power Solutions have been undertaking repairs of the damaged engine block, steel components repair, cast iron repairs and all types of cast components by metal stitching and metal locking process for last four decades.

Metal Stitching & Metal Locking of Suction Bell Mouth of CW Pump Repairing
Metal Stitching & Metal Locking of Suction Bell Mouth of CW Pump Repairing
Broken Suction Bell Mouth of CW Pump
Broken Suction Bell Mouth of CW Pump

 We have a separate and dedicated team of technicians who have the capability to undertake the onsite repair of crack and damage casting by using portable tools and high-quality consumables (locks and keys ) which are imported by us from UK.
Broken Area of Engine Block
Broken Area of Engine Block

 

Engine Block After Metal Stitching and Metal Locking
Engine Block After Metal Stitching and Metal Locking

 

 

 

I) It is possible to undertake crack repair and repair of damage casting by metal stitching and metal locking process onsite. Hence there is no requirement of transporting the crack or damage components to the workshop.

II) In most of the cases, there is no requirement of dis assembly of equipment.

III) We possess portable tools to execute the repairs on site.

IV) The time duration for repair of crack and damaged cast components by metal lock and metal stitching is low.

V) Metal Stitching and Metal Locking is a permanent crack repair method as no heat is generated which is associated with welding.

VI) The crack and damaged area after repair by metal locking and metal stitching process are restored to its original profile and are also recommended  for gas or watertight repair.

VII) Repairs are undertaken with the guarantee.

Metal Surgery under Process while Vessel is Sailing
Metal Surgery under Process while Vessel is Sailing
The repair by metal stitching and metal locking process can be undertaken of cast iron, aluminum parts including the following :

I) Damaged turbocharger casing.
II) Pump casing and gearboxes.
III) Cracked engine block, cam covers, cylinder liners, turbine casings, and all components.
IV) Heavy industrial and mining equipment.

For detailed repair process of damaged casting by metal locking and metal stitching, email us on info@rapowersolutions.com

Leave a Reply

Your email address will not be published. Required fields are marked *