Crankshaft Grinding | Crankshaft Repair Services | Onsite Machining- RA Power Solutions

RA Power Solutions undertakes onsite crankshaft grinding and crankshaft repair for the diameter ranging from 30 mm to 700 mm.

The small diameter crankshaft is repaired on site without removing the crankshaft from the block. These services are of great use for the engines which are installed in construction-related equipment, compressors and the diesel driven equipment operating in remote areas.

Crankpin Before Grinding
Crankpin Before Grinding
Inspection of Crankpin is in Process
Inspection of Crankpin is in Process

 

 

 

 

 

 

 

Our services of crankshaft grinding and crankshaft repair are proven as we have been extending these services all over the world for the last forty years. The main feature of onsite crankshaft grinding, onsite crankshaft repair, crankshaft polishing, and onsite machining are as following:
I) RA Power design and manufacture on site crankshaft grinding equipments as per the site requirement and the space constrains Hence there is no compromise with the quality after the repair of the crankshaft.

Grinding of Crankpin by Crankshaft Grinding Machine is in Process
Grinding of Crankpin by Crankshaft Grinding Machine is in Process

II) All the parameters of the crankshaft grinding are maintained strictly as per the manufacturer’s recommendations and tolerances. Inspection report in detail is submitted to the client.

III) In RA Power Solutions, we give great importance to the calibration of the crankshaft and inspection in detail by the experienced technicians which helps us to plan a right strategy and selection of right equipments for onsite grinding and onsite repair of a crankshaft.

IV) We possess the latest breed of inspection instruments including the instruments for NDT test which helps us to find out the exact fault in the crankshaft resulting to successful repairs.

V) Replacement of crankshaft in case of breakdown by new crankshaft or reconditioned crankshaft is our expertise. The crankshaft of an auxiliary engine can also be replaced while sailing of the vessel.

VI) The crankpin and main journals of the crankshaft having damaged radius fillet or small crank pin bearing width are also repaired by RA Power with the guarantee.

Our services for crankshaft grinding and repair are available 24*7. Technicians can fly down with portable lightweight crankshaft grinding machine in short notice to all over the world as they carry Indian CDC.

We have been regularly working for various models of engine like Wartsila , Daihatsu , MWM , Caterpillar , MaN , MaK , B&W , Sulzer , Bergen , Detroit Diesel , Stork Werkspoor , Pielstick , Deutz , Yanmar , MTU , Cummins , Nohab Polar , Caterpillar , Mitsubishi , Yanmar , MaK 551 , MaK 552 , MaK 453 , MaK 451 AK , MaK 452 AK , Deutz 540 , Deutz 358 , Deutz 350, Pielstick PC 2.2 PC 2.5, Wartsila 524 ,Wartsila 824 TS, Sulzer 6 AL 25/30 and many more.

Crankpin After Grinding by RA Power Solutions
Crankpin After Grinding by RA Power Solutions
Crankshaft Grinding Service on Moving Vessel
Crankshaft Grinding Service on Moving Vessel

Leave a Reply

Your email address will not be published. Required fields are marked *